Rebuild woes

Anything related to these brands.

Moderators: James - Admin, Mick- Can Am

Rebuild woes

Postby Stinger300XLC » Fri Sep 07, 2018 3:12 pm

Engines been out the bike for ages now and I’m sorry to be an amateur but where do these connect again? I literally can’t remember

Earth wire? Picture attached

And secondly - there’s a “breather” tube that goes from the rear gear assembly and I can’t remember where it connects?

Image


Sent from my iPhone using Tapatalk
Last edited by Stinger300XLC on Sun Sep 16, 2018 3:02 pm, edited 1 time in total.
User avatar
Stinger300XLC
40 posts
40 posts
 
Posts: 46
Joined: Sat Sep 23, 2017 9:38 pm
Has thanked: 6 times
Been thanked: 0 time
Cash on hand: 0.00
Town/City: Alton
Make. Enter none if you don't have one.: Quadzilla
Model: 300 XLC Stinger
Year of manufacture Enter 0 if none: 2011

Share On:

Share on Twitter Twitter Share on MySpace MySpace

Re: Rebuild woes

Postby mrtigger » Fri Sep 07, 2018 9:18 pm

The breather just hangs down between back of swing arm and engine. As for the wire given the hoop fastener and black colour I'd summise its a earth strap yes.

Sent from my ONEPLUS A5000 using Tapatalk
Image
User avatar
mrtigger
90 posts or more
90 posts or more
 
Posts: 2405
Images: 1
Joined: Wed Jun 11, 2014 11:14 am
Has thanked: 28 times
Been thanked: 129 times
Cash on hand: 3,734.00
Town/City: essex
Make. Enter none if you don't have one.: Barossa
Model: Cheetah 250 AKA Big Fatty
Year of manufacture Enter 0 if none: 2005

Re: Rebuild woes

Postby Stinger300XLC » Sat Sep 08, 2018 5:23 pm

Thanks! I’ll probably shove another photo up when I next get the bike out the shed just to make sure I’m talking sense with this breather tube thing. Because it’s the one that goes to the rear gear assembly

Thanks for the reply! Much help


Sent from my iPhone using Tapatalk
User avatar
Stinger300XLC
40 posts
40 posts
 
Posts: 46
Joined: Sat Sep 23, 2017 9:38 pm
Has thanked: 6 times
Been thanked: 0 time
Cash on hand: 0.00
Town/City: Alton
Make. Enter none if you don't have one.: Quadzilla
Model: 300 XLC Stinger
Year of manufacture Enter 0 if none: 2011

Re: Rebuild woes

Postby mrtigger » Mon Sep 10, 2018 7:47 am

If its the one coming out the top of the crankcase below the carbs, facing up, yes that's the one. It just hangs.

Sent from my ONEPLUS A5000 using Tapatalk
Image
User avatar
mrtigger
90 posts or more
90 posts or more
 
Posts: 2405
Images: 1
Joined: Wed Jun 11, 2014 11:14 am
Has thanked: 28 times
Been thanked: 129 times
Cash on hand: 3,734.00
Town/City: essex
Make. Enter none if you don't have one.: Barossa
Model: Cheetah 250 AKA Big Fatty
Year of manufacture Enter 0 if none: 2005

Re: Rebuild woes

Postby Stinger300XLC » Sun Sep 16, 2018 2:59 pm

Brill thanks. The one out the crank is now where it should be

The one I’m more concerned of is this one

Image

The end with the arrow is routed through the back and is towards the engine but I can’t see where it attaches (unless of course this smaller pipe is the same theory as it’s big brother and attaches to nothing and is the oil vent for the rear gear assembly?)

Also that earth wire in the above - where does it bolt to? One of the timing chain bolts on the crankcase?




Sent from my iPhone using Tapatalk
User avatar
Stinger300XLC
40 posts
40 posts
 
Posts: 46
Joined: Sat Sep 23, 2017 9:38 pm
Has thanked: 6 times
Been thanked: 0 time
Cash on hand: 0.00
Town/City: Alton
Make. Enter none if you don't have one.: Quadzilla
Model: 300 XLC Stinger
Year of manufacture Enter 0 if none: 2011



  • Advertisement

Return to Quadzilla/Dinli/Apache/SMC/RAM and all other Taiwanese makes.

Who is online

Users browsing this forum: No registered users and 4 guests